I have a replacement throttle cable for my +2. The carb end of the cable
stops at the hole in the intake manifold. Actually it is the emissions "pre
heater".

Was the original cable end screwed or affixed to this? It appears so flimsy
as the replacement just lays there.

Bob
1969 Elan +2




__._,_.___ Messages in this topic (1) Reply (via web post) | Start a new topic
.


__,_._,___

The cable end is not fixed in the hole. It just lays there, as you
indicated, but the throttle return spring holds it snug.

Dave 72 Sprint Dhc

----- Original Message -----
From: <***@***.*** ([email]RDSSDi%40AOL.COM[/email])>
To: <***@***.***>ps.com ([email]lotuselan%40yahoogroups.com[/email])>
Sent: Saturday, November 18, 2006 7:02 AM
Subject: [LotusElan.net] throttle cable

>I have a replacement throttle cable for my +2. The carb end of the cable
> stops at the hole in the intake manifold. Actually it is the emissions
> "pre
> heater".
>
> Was the original cable end screwed or affixed to this? It appears so
> flimsy
> as the replacement just lays there.
>
> Bob
> 1969 Elan +2
>
>
>
>
>
>
>
> http://www.LotusElan.net
>
> Yahoo! Groups Links
>
>
>


__._,_.___ Messages in this topic (2) Reply (via web post) | Start a new topic
.


__,_._,___

As I have fit K&N filters, I will have to fabricate a bracket for the return
spring. It originally ran to the air box.

Bob
1969 Elan +2




__._,_.___ Messages in this topic (3) Reply (via web post) | Start a new topic
.


__,_._,___