Topgaiters Dash Cover
7 posts
• Page 1 of 1
While I continue to search for something to use as a +2 dash core, as anybody tried one of these covers from eBay?
http://www.ebay.com/itm/BLACK-STITCH-TO ... 51bd41d54f
http://www.ebay.com/itm/BLACK-STITCH-TO ... 51bd41d54f
J Geezer
2004 Cadillac CTS-V
2003 Corvette Coupe
1969 Elan+2 Federal
(Past MGA, MGB, TR6, AH 3000 BJ8, XR4ti, BMW E39 540i/6, Lola T644 ... )
2004 Cadillac CTS-V
2003 Corvette Coupe
1969 Elan+2 Federal
(Past MGA, MGB, TR6, AH 3000 BJ8, XR4ti, BMW E39 540i/6, Lola T644 ... )
-
JGeezer - Second Gear
- Posts: 186
- Joined: 09 Nov 2012
60 Day full refund...I hope thay have someone who likes peeling Evostick off things
John
John
-
john.p.clegg - Coveted Fifth Gear
- Posts: 5744
- Joined: 21 Sep 2003
It looked pretty good and thought I might try it but noticed on close up, there's a center seam--glaringly wrong. Gordon Sauer
- Gordon Sauer
- Fourth Gear
- Posts: 672
- Joined: 20 Aug 2004
Gordon Sauer wrote:It looked pretty good and thought I might try it but noticed on close up, there's a center seam--glaringly wrong. Gordon Sauer
Didn't notice that. I can understand why using real leather makes it hard to get single [expensive] pieces that long, but yeah.
J Geezer
2004 Cadillac CTS-V
2003 Corvette Coupe
1969 Elan+2 Federal
(Past MGA, MGB, TR6, AH 3000 BJ8, XR4ti, BMW E39 540i/6, Lola T644 ... )
2004 Cadillac CTS-V
2003 Corvette Coupe
1969 Elan+2 Federal
(Past MGA, MGB, TR6, AH 3000 BJ8, XR4ti, BMW E39 540i/6, Lola T644 ... )
-
JGeezer - Second Gear
- Posts: 186
- Joined: 09 Nov 2012
Just received my dash cover after I went ahead and ordered it because in email correspondence with them, they indicated they could make it in vinyl, as original, and then not have the center seam. I'm really pleased, I just ran out to the car and laid it over everything and it's really nicely cut, the corners that are always a little fiddly look like they're nicely sewn and balanced so that that should work out nicely once I work it against the mold of the dash. But really pleased. Gordon Sauer
- Gordon Sauer
- Fourth Gear
- Posts: 672
- Joined: 20 Aug 2004
Gordon Sauer wrote:Just received my dash cover after I went ahead and ordered it because in email correspondence with them, they indicated they could make it in vinyl, as original, and then not have the center seam. I'm really pleased, I just ran out to the car and laid it over everything and it's really nicely cut, the corners that are always a little fiddly look like they're nicely sewn and balanced so that that should work out nicely once I work it against the mold of the dash. But really pleased. Gordon Sauer
Sounds promising if needed. What did they charge?
J Geezer
2004 Cadillac CTS-V
2003 Corvette Coupe
1969 Elan+2 Federal
(Past MGA, MGB, TR6, AH 3000 BJ8, XR4ti, BMW E39 540i/6, Lola T644 ... )
2004 Cadillac CTS-V
2003 Corvette Coupe
1969 Elan+2 Federal
(Past MGA, MGB, TR6, AH 3000 BJ8, XR4ti, BMW E39 540i/6, Lola T644 ... )
-
JGeezer - Second Gear
- Posts: 186
- Joined: 09 Nov 2012
Came out to like $165 US. Seems like given what upholsterer's charge for sewing things and all, if you've got the base okay this would really be a good thing. However in contrast I do have an MGB and got a top panel to hide a crack and that was only $78 but then that's an MG. Gordon Sauer
- Gordon Sauer
- Fourth Gear
- Posts: 672
- Joined: 20 Aug 2004
7 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 10 guests