Is there a black-restore product for rocker switches?

PostPost by: JonB » Mon Nov 20, 2017 4:37 pm

Meguigar's do a good plastic restorer called "Ultimate Black". It's a white cream, ironically. I have just put some on my switches and they came up OK but the plastic is sort of rough in texture and may need a clean first. I've used it on other black plastics and it works well. Not as greasy to the touch as Armor-all and thicker. Apply with a cloth (no temptation to spray it with Armor-all and get spots of it everywhere).

http://www.halfords.com/motoring/car-cl ... lack-355ml

Not cheap but worth it.
User avatar
JonB
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2396
Joined: 14 Nov 2017

PostPost by: JonB » Fri Aug 30, 2019 9:22 am

I've done some testing on my grey rocker switches with various products.

  • Megiar's Ultimate Black gave OK results but faded quickly.
  • Armor-all Glossy, Matt and Tyre foam again was OK but soon faded to grey.
  • T-cut, buffing, sanding didn't seem to do much (but then I didn't persevere for long).

So basically, scratch those expensive products from the list.

I wasn't able to test DOT-5 as none of my cars use the stuff so I haven't got any. It's looking more and more like I will have to buff with rouge as mentioned in another thread on the subject.
User avatar
JonB
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2396
Joined: 14 Nov 2017

PostPost by: elanfan1 » Fri Aug 30, 2019 12:21 pm

Gentle rub down with fine wet and dry to remove finger grease and dirt avoiding rounding the corners and edges. Then a couple of coats of satin black aerosol paint, job done and will last years and look really good too. No need for expensive and non lasting solutions.
Steve

Silence is Golden; Duct Tape is Silver
User avatar
elanfan1
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2238
Joined: 13 Jan 2004

PostPost by: Mudmouse » Fri Aug 30, 2019 1:40 pm

For info, having worked in the plastics industry for too many years I can confirm that the whitening phenonenum that you see is actually micro cracking on the surface of the plastic due to uv degradation.

It is similar to the effect of shattering of an old fashioned toughened windscreen. It looks white but is in reality not. When you smear an oil over the surface it fills in the microcracks such that the appearance returns to how it was originally. I.e. the colour has not faded but surface scattering of the light due to the microcracks has made it look as if it has faded.

If you can remove the surace layer that has the microcracks it will return to its original colour.

Hope this helps

Steve
Mudmouse
First Gear
First Gear
 
Posts: 18
Joined: 15 May 2019

PostPost by: 69S4 » Fri Aug 30, 2019 1:59 pm

So the other Steve's suggestion of painting the surface with satin black should work? It'll keep the UV away - won't it?
All I need to do now is work out a way of spraying them in situ :?
Stuart Holding
Thame UK / Alpe D'Huez France
69 S4 FHC
Honda GoldWing 1800
Honda CBX1000
Kawasaki H1 500
Yamaha XS2
69S4
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1347
Joined: 23 Sep 2004

PostPost by: Mudmouse » Fri Aug 30, 2019 2:44 pm

Something I have just thought of but not tried - black boot polish. That is soft enough to be pressed into the surface then polished off.

It should work and be easy to reapply if needed. Does anyone have a spare switch they could try it on?

Steve S
Mudmouse
First Gear
First Gear
 
Posts: 18
Joined: 15 May 2019

PostPost by: JonB » Fri Aug 30, 2019 3:16 pm

Boot polish - immediate impact but it goes back to grey after a short while. Probably after the wax has dried out.
User avatar
JonB
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2396
Joined: 14 Nov 2017

PostPost by: Mudmouse » Fri Aug 30, 2019 3:20 pm

Ah well, just a thought. Thanks for that though.
Mudmouse
First Gear
First Gear
 
Posts: 18
Joined: 15 May 2019

PostPost by: mark030358 » Fri Aug 30, 2019 3:27 pm

Gtechnique ermanent trim restorer...
User avatar
mark030358
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1168
Joined: 29 May 2004

PostPost by: JonB » Fri Aug 30, 2019 3:45 pm

I may have found a solution from my mates in the retro computing fraternity.

  • Clean all traces of dirt from the rocker. I use hot water and detergent then brake cleaner. The plastic will come up quite white after this.
  • Rub a mineral oil into the plastic. For example, baby oil seems to work well.
  • Rub some more in, then buff with a clean cloth. Repeat until satisfied.

Take a look:

img_5748.jpg and


  • demist = as it came out of the car
  • LH win = after cleaning with detergent then brake cleaner
  • wiper = after treatment with baby oil
  • fog = after three goes with black boot polish

So the best things about using a mineral oil are that its easy to apply, even in situ and it won't mark the dashboard or your fingers in use because it is clear. Of course, it may wear off or evaporate but so far it's looking promising.

img_5749.jpg and
Closeup of the wiper switch
User avatar
JonB
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2396
Joined: 14 Nov 2017

PostPost by: USA64 » Fri Aug 30, 2019 4:02 pm

I have seen non-gel toothpaste touted as a fine-abrasive for headlight covers. I will try a little on a Dremel buffing wheel when I get to that; hopefully soon.
We are supposed to be having fun, are we not?
USA64
Third Gear
Third Gear
 
Posts: 298
Joined: 10 Dec 2017

PostPost by: JonB » Fri Aug 30, 2019 4:13 pm

img_5750.jpg and
All done.


The switches have still got some patina, which is nice, depending on your point of view. New switches are ?30 a pop :shock: and have shiny plastic that looks cheap. I'll stick with matte.

(BTW I did try some toothpaste with a cloth but it didn't really help. With a Dremel there is a better chance if you don't mind the stuff getting everywhere.)
User avatar
JonB
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2396
Joined: 14 Nov 2017

PostPost by: nmauduit » Fri Aug 30, 2019 6:01 pm

nine pretty maids all in a row, waiting to be switched on...
S4SE 36/8198
User avatar
nmauduit
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2037
Joined: 02 Sep 2013

PostPost by: JonB » Fri Aug 30, 2019 6:46 pm

Looking good, and they still haven't greyed.

img_5751.jpg and


That's the new dashboard. I've done the switches, fusebox and heater controls. Tricky. Measure twice, drill once. I'll put the rear brackets on next, then the various other bits that are hidden, and finally the glovebox and lid. It's going to look epic.
User avatar
JonB
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2396
Joined: 14 Nov 2017

PostPost by: Mudmouse » Fri Aug 30, 2019 6:55 pm

That looks fantastic. I will have to do mine at some point
Cheers Steve S
Mudmouse
First Gear
First Gear
 
Posts: 18
Joined: 15 May 2019
PreviousNext

Total Online:

Users browsing this forum: No registered users and 29 guests