wipper motor switch
4 posts
• Page 1 of 1
Have never seen a wiper switch looking like that before?
John
John
-
john.p.clegg - Coveted Fifth Gear
- Posts: 5745
- Joined: 21 Sep 2003
Yes that's the same switch as I have except that it's been modified for electric washer operation.
I can only assume that Green on the old loom is now Green/black on the new loom, should be 12 V.
In the wiring diagram light green is term one, your green/black on term 2, yellow on term 3 and blue/yellow on term 4. I can't see that colour on your loom so you will have to look at the motor plug and see what colour you have on there.
Hope this helps.
Cheers
John
I can only assume that Green on the old loom is now Green/black on the new loom, should be 12 V.
In the wiring diagram light green is term one, your green/black on term 2, yellow on term 3 and blue/yellow on term 4. I can't see that colour on your loom so you will have to look at the motor plug and see what colour you have on there.
Hope this helps.
Cheers
John
- elanman999
- Third Gear
- Posts: 487
- Joined: 12 Nov 2005
4 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 18 guests