Lotus Elan

Gear lever bush s4

PostPost by: shaun » Wed Jan 17, 2018 7:46 am

Having just had my gear lever chromed can anybody give me the measurement the bush has to be pressed in thanks
Attachments
7161fabb-4cef-467a-90ec-b29455fff8ea.jpeg and
shaun
Second Gear
Second Gear
 
Posts: 172
Joined: 30 Nov 2008

PostPost by: oldelanman » Wed Jan 17, 2018 9:17 am

I don't have a precise measurement but you need to ensure that the thick steel spacer/washers that go above and below the bush are both within the housing when it's assembled so that probably puts the bush more or less central in the housing. Also, depending how thick your new chrome plating is, you may need to reduce the diameter of the spacers a little to maintain the minimum clearance there should be between spacers and housing - if they are in contact obviously the bush won't have any effect but if the clearance is too large the shift will feel spongy and imprecise.
Roger
S4 DHC
oldelanman
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1314
Joined: 02 Jan 2008
Location: Dorset UK

Total Online:

Users browsing this forum: No registered users and 6 guests