Bellhousing needed for a 1960 lotus elite
4 posts
• Page 1 of 1
Post by: holywood3645 » Fri Nov 11, 2016 9:03 pm
Need a bell housing for a ZF to Coventry Climax engine... any one got one?
James
James
-
holywood3645 - Coveted Fifth Gear
- Posts: 1102
- Joined: 07 Oct 2003
Post by: CBUEB1771 » Sat Nov 12, 2016 4:14 am
I assume you mean for the ZF S4-12 gearbox used in the Elite. Have you tried Will Blacklidge at Mk 14 Components?
http://www.mk14components.com/index.php
He lists them in his web catalog. Horst Auer had a run of them made before he passed away and I think Will may have acquired the stock. I bought one from Horst and also have an original one, however I have plans for both.
http://www.mk14components.com/index.php
He lists them in his web catalog. Horst Auer had a run of them made before he passed away and I think Will may have acquired the stock. I bought one from Horst and also have an original one, however I have plans for both.
Russ Newton
Elan +2S (1971)
Elite S2 (1962)
Elan +2S (1971)
Elite S2 (1962)
-
CBUEB1771 - Coveted Fifth Gear
- Posts: 1684
- Joined: 09 Nov 2006
Post by: StressCraxx » Sat Nov 12, 2016 5:33 am
James,
If the above doesn't pan out, contact Mike Ostrov. He is an Elite guru and forum member.
Dan
If the above doesn't pan out, contact Mike Ostrov. He is an Elite guru and forum member.
Dan
There is no cure for Lotus, only treatment.
-
StressCraxx - Coveted Fifth Gear
- Posts: 1425
- Joined: 26 Sep 2003
Post by: holywood3645 » Sat Nov 12, 2016 6:01 am
Thanks for the info
-
holywood3645 - Coveted Fifth Gear
- Posts: 1102
- Joined: 07 Oct 2003
4 posts
• Page 1 of 1
Total Online:
Users browsing this forum: pdenton26 and 27 guests
Site map
SitemapIndex
RSS Feed