Oil gun for trunnions

PostPost by: JimE » Wed Feb 21, 2018 10:57 pm

Can anyone recommend an oil gun to service the trunnions. Jim
JimE
Third Gear
Third Gear
 
Posts: 406
Joined: 22 Jan 2017

PostPost by: ericbushby » Wed Feb 21, 2018 11:17 pm

Hi Jim,
I just use an extra Wanner grease gun kept specially for oil.
It is a bit leaky and messy and is kept in a plastic bag but does the job well.
I bought it second hand at a car show.
Eric in Burnley
S3SE DHC
ericbushby
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1345
Joined: 13 Jun 2011

PostPost by: JimE » Wed Feb 21, 2018 11:41 pm

Thanks Eric - I see Cromwell's do one. Jim
JimE
Third Gear
Third Gear
 
Posts: 406
Joined: 22 Jan 2017

PostPost by: USA64 » Thu Feb 22, 2018 3:20 am

Or you can pull the plug out and squirt it in with an oil can. I haven't tried it yet. Someone told me that and if it works I'll have to kick myself.
We are supposed to be having fun, are we not?
USA64
Third Gear
Third Gear
 
Posts: 297
Joined: 10 Dec 2017

PostPost by: MarkDa » Thu Feb 22, 2018 2:46 pm

Or try this with free delivery - no connection etc.

www.pressparts.co.uk/Mobile/pump-gun-wi ... 2x14443942
MarkDa
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1215
Joined: 15 Apr 2017

PostPost by: JimE » Thu Feb 22, 2018 3:47 pm

MarkDa wrote:Or try this with free delivery - no connection etc.

http://www.pressparts.co.uk/Mobile/pump ... 2x14443942

Looks good. Thanks.
JimE
Third Gear
Third Gear
 
Posts: 406
Joined: 22 Jan 2017

PostPost by: JonB » Fri Feb 23, 2018 8:04 am

You need to inject the oil with pressure so it drives out the old contaminated oil.

I bought a small grease gun for this, but have not tried it yet (my truns are new and were assembled full of oil).
User avatar
JonB
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2386
Joined: 14 Nov 2017

PostPost by: Donels » Tue Feb 27, 2018 8:40 pm

I just use a standard oil can. No pressure is required, just unscrew the grease nipple, hold the oil can nozzle against the hole and pump away. The oil easily squeezes through the threads and out of the top seal. Wipe down and refit the grease nipple.
Elan +2
Elise mk 1
Donels
Fourth Gear
Fourth Gear
 
Posts: 676
Joined: 10 Sep 2016

PostPost by: paddy » Tue Feb 27, 2018 11:38 pm

1963 Elan S1
User avatar
paddy
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1196
Joined: 27 Oct 2008

PostPost by: billwill » Wed Feb 28, 2018 12:02 am

paddy wrote:I use one like this: https://www.clarketools.net/clarke-cgg2 ... 1986-p.asp

Paddy



I've got one similar to that but I could not get it to seal well enough to use oil.
Bill Williams

36/6725 S3 Coupe OGU108E Yellow over Black.
billwill
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 5053
Joined: 19 Apr 2008

PostPost by: rgh0 » Wed Feb 28, 2018 9:02 am

If you use grease, which is the technically correct lube for this situation ( despite the some what questionable manufacturers recommendation) you don't need to worry about how to get oil in :lol:

sorry but I could not resist any longer

cheers
Rohan
User avatar
rgh0
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 8803
Joined: 22 Sep 2003

PostPost by: billwill » Wed Feb 28, 2018 11:13 am

rgh0 wrote:If you use grease, which is the technically correct lube for this situation ( despite the some what questionable manufacturers recommendation) you don't need to worry about how to get oil in :lol:

sorry but I could not resist any longer

cheers
Rohan


I did end up using grease. :D :oops: :roll:

Though I now have some of the parts to replace the uprights and trunnions; just too many other activities to start on them.
Bill Williams

36/6725 S3 Coupe OGU108E Yellow over Black.
billwill
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 5053
Joined: 19 Apr 2008

PostPost by: MarkDa » Wed Feb 28, 2018 11:56 am

My preference is an MS2 grease but I have no scientific basis for the choice, other than the belief that the parts will be 'coated'.
The downside is that when regreasing it's not quite as obvious when the new grease is coming through.
MarkDa
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1215
Joined: 15 Apr 2017

PostPost by: rgh0 » Wed Feb 28, 2018 12:12 pm

One more time just for laughs

The biggest technical issue with using oil to lube the trunnions is that the top seal is crude and will let water in to contaminate the oil rapidly. If you use a water proof grease this forms a positive barrier to prevent the water that gets past the seal reaching deeper into the trunnion and affecting the lubrication of the trunnion.

The reason oil is selected over grease for lubrication is generally dependent of speed of the lubrication surface, Grease is good in low speed applications but becomes less effective in high speed ( thus oil in your gearbox not grease), the trunnion is definitely a low speed situation and grease is definitely suitable. The trunnion thread is segmented which allows grease to adequately coat all the moving surfaces inside.

Both work, especially if you renew the oil frequently but technically grease is the better solution and easier to apply with a grease gun though harder to clean up the oil grease around the trunnion that is pushed out versus oil oil that drips on the ground to be wiped up as its pushed out :lol:

cheers
Rohan
User avatar
rgh0
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 8803
Joined: 22 Sep 2003

PostPost by: JonB » Wed Feb 28, 2018 2:23 pm

Rohan, what's your view on the "50/50 EP90 / LM grease" mix for trunnion lubrication?
User avatar
JonB
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2386
Joined: 14 Nov 2017
Next

Total Online:

Users browsing this forum: No registered users and 5 guests