Using a stretch guage - advice needed

PostPost by: 2cams70 » Sat Sep 30, 2017 3:03 pm

Hi Guys,
As this is my first serious engine build I decided to splash out on an ARP stretch guage. Reading the included instructions they say "You always use .200" - .400" preload on the guage and tighten the set screw and lock nut on the adjusting screw". Surely this is an error, 0.200 to 0.400" seems like a heck of a lot of preload. Should it be 0.020" - 0.040" or maybe 0.002" - 0.004"?

Any other things I need to know to get an accurate result with this gadget? - I'm using the ARP lube of course.
Attachments
img_19661.jpg and
img_19691.jpg and
1970 Ford Escort Twin Cam
1972 Ford Escort GT1600 Twin Cam
1980 Ford Escort 2.0 Ghia
Peugeot 505 GTI Wagons (5spdx1) (Autox1)
2022 Ford Fiesta ST.
2cams70
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2046
Joined: 10 Jun 2015

PostPost by: nmauduit » Sat Sep 30, 2017 3:31 pm

I don't want to crash into opened doors as we says here (i.e. what I'm about to say may be obvious to you), but my guess is preload would mean you don't want to be using the gauge towards the end of its scale, since the tip is spring loaded it always rest at the end of travel : you want to make sure that the tip will be within the proper scale portion for the whole measurement.
S4SE 36/8198
User avatar
nmauduit
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2037
Joined: 02 Sep 2013

PostPost by: rgh0 » Sat Sep 30, 2017 9:03 pm

Yes I normally set the gauge to be around mid range in its travel before I start tightening the bolts.

cheers
Rohan
User avatar
rgh0
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 8814
Joined: 22 Sep 2003

Total Online:

Users browsing this forum: No registered users and 5 guests