Lotus Elan

26r Frame Versus Spyder One

PostPost by: bs982367 » Wed Feb 25, 2004 1:39 pm

I have to fit a new frame on my S4SE Elan and would like to know which one should be the best for track days and hill climbing.

A recent post on the mail list (Elan) showed me that the genuine Elan S4SE frame is more heavy , less well manufactured and less efficient than the Spyder one.
So I forget the genuine S4SE one !I still hesitate between the 26R one and the Spyder one.

Can I get the information about:
- efficiency
- price
- wieght
- rigidity

Many thanks in advance !

Edouard
S4SE 1969
bs982367
First Gear
First Gear
 
Posts: 37
Joined: 14 Jan 2004
Location: avenue Marie Th?r?se 7 - 1410 Waterloo Belgium

PostPost by: steve » Wed Feb 25, 2004 6:23 pm

again its down to origonality !
the spyder chassis is easier to work on ,ie easier to get to the diff around the engine etc etc ,it will last longer ( if its powder coated ) ,its a lot stiffer ,the list goes on :o ;)
"everyone wants a piece of me and it hurts "<br>when my right leg starts shaking thats when i know i am having fun !
steve
First Gear
First Gear
 
Posts: 29
Joined: 12 Sep 2003

PostPost by: elancoupe » Thu Feb 26, 2004 3:58 am

The Spyder makes certain jobs on the car much easier, motor mounts, etc. Spyders are well made and well thought out. They are also slightly heavier than the 26 r type. If you plan to compete in a racing association, make certain that the Spyder is a legal modification, in some groups they are not allowed.

The 26r chassis is a big improvement over the standard one. In typical TTR fashion, the upgrades are well executed, making for a much stronger unit. These chassis' can be bought painted or unpainted, so that you have the option of powder coating yours, should you so desire. The TTR chassis is not galvanized.

Either one would make a fine choice. My suggestion would be to view each one, if possible, then decide for yourself.
Mike
elancoupe
Fourth Gear
Fourth Gear
 
Posts: 914
Joined: 11 Sep 2003
Location: USA

PostPost by: Evan Carpenter-Crawford » Fri Mar 12, 2004 1:11 pm

FWIW- I did some checking a couple of years ago and the spyder chassis is lighter than the TTR 26R chassis. As I recall
both were heavier than an original chassis, but the spyder was only a little bit more.... I'm sure I wrote this down in my planning book - I'll check and re-post later.
Evan Carpenter Crawford
1969 FHC 8624
Evan Carpenter-Crawford
First Gear
First Gear
 
Posts: 45
Joined: 12 Sep 2003
Location: michigan

PostPost by: roadterror » Fri Mar 19, 2004 6:13 pm

If the rules allow, go for a Spyder spaceframe and don't look back. So much easier to get repairs done and looks like what Colin should have built in the first place!

Cheers!
Brian
Elan Sprint
Plus Two
Europa TC
... all fitted with Spyder frames

A purist only where looks matter....
roadterror
Second Gear
Second Gear
 
Posts: 113
Joined: 12 Mar 2004

PostPost by: cabc26b » Thu Jul 22, 2004 7:29 pm

Do the TTR its the most acdepted by sanctioning bodies for racing
cabc26b
Fourth Gear
Fourth Gear
 
Posts: 918
Joined: 21 Sep 2003

Total Online:

Users browsing this forum: No registered users and 0 guests