piston design needed

[foggy]

Anyone have a usable piston design for higher lift(short duration)
cam, oversize intake valve, +1mm diameter light weight, etc. I wish
to go to JE(or one of it's resale shops) with a workable drawing. This
is for (short,) S2 block.


Thanks, all
Steve

[steveww]

As far as I know deep pocket pistons are available off the shelf from the
usual suspects."foggyalfa" <***@***.***; wrote: >
Anyone have a usable piston design for higher lift(short duration) > cam,
oversize intake valve, +1mm diameter light weight, etc. I wish > to go to
JE(or one of it's resale shops) with a workable drawing. This > is for
(short,) S2 block. > > > Thanks, all > Steve > >
> > > Regards, Steve Waterworth
_________________________________________________________
This mail sent using V-webmail - http://www.v-webmail.org