Radiator support brackets
4 posts
• Page 1 of 1
Hi all,
Can someone please look at their radiator support brackets (the
brackets that are attached between the front chassis uprights and the
bonnet/hood pivot point) and advise the orientation of the brackets.
Specifically, at the top end, does the right angle point inwards or
outwards.
Thanks, Colin. 68S4DHC
Can someone please look at their radiator support brackets (the
brackets that are attached between the front chassis uprights and the
bonnet/hood pivot point) and advise the orientation of the brackets.
Specifically, at the top end, does the right angle point inwards or
outwards.
Thanks, Colin. 68S4DHC
'68 S4 DHC
- fatboyoz
- Fourth Gear
- Posts: 693
- Joined: 04 Oct 2003
At the top end of the bracket, the right angle bend points outward where it
connects to the bonnet/hood pivot. The connection is to one of the "bearing"
screws in the pivot, third from the top.
Dave - 72 Sprint DHC
----- Original Message -----
From: "fatboyoz" <***@***.***>
Sent: Tuesday, October 03, 2006 3:06 AM
Subject: [LotusElan.net] Radiator support brackets
connects to the bonnet/hood pivot. The connection is to one of the "bearing"
screws in the pivot, third from the top.
Dave - 72 Sprint DHC
----- Original Message -----
From: "fatboyoz" <***@***.***>
Sent: Tuesday, October 03, 2006 3:06 AM
Subject: [LotusElan.net] Radiator support brackets
- dlbarnes1
- Second Gear
- Posts: 139
- Joined: 22 Sep 2003
I understand the situation. On mine, with the right angle outward and the
original radiator, the bracket was bent outward (below the pivot) and the
mounting plate on the radiator was trimmed to clear the bracket. I have
since fitted a cross-flow radiator and refined that bracket arrangement.
Dave - 72 Sprint DHC
----- Original Message -----
From: "William "Skip" King" <***@***.***>
Sent: Tuesday, October 03, 2006 5:46 PM
Subject: Re: [LotusElan.net] Radiator support brackets
original radiator, the bracket was bent outward (below the pivot) and the
mounting plate on the radiator was trimmed to clear the bracket. I have
since fitted a cross-flow radiator and refined that bracket arrangement.
Dave - 72 Sprint DHC
----- Original Message -----
From: "William "Skip" King" <***@***.***>
Sent: Tuesday, October 03, 2006 5:46 PM
Subject: Re: [LotusElan.net] Radiator support brackets
- dlbarnes1
- Second Gear
- Posts: 139
- Joined: 22 Sep 2003
4 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 3 guests