head gasket
2 posts
• Page 1 of 1
Silly question but could someone tell me which way up the head gaskets
should go please? Is it copper coloured side up or down?
Thanks
should go please? Is it copper coloured side up or down?
Thanks
- NickWilmshurst
- Second Gear
- Posts: 74
- Joined: 30 Aug 2013
Nik,
There is a little oval hole in one corner of the gasket, which makes that corner unique. It must line up with the oil pressure feed to the head holes in the front of the block and head. If you meet that criteria, there is only one way it will work.
Roger
There is a little oval hole in one corner of the gasket, which makes that corner unique. It must line up with the oil pressure feed to the head holes in the front of the block and head. If you meet that criteria, there is only one way it will work.
Roger
- Elan45
- Coveted Fifth Gear
- Posts: 2518
- Joined: 23 Nov 2008
2 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 8 guests