Lotus Elan

K & N

PostPost by: jens maudal » Sun Nov 12, 2006 9:10 pm

The air box on the +2 has a bracket for
the throtle cable, i would like to fit
K&N filters - what do i do with the cable
bracket.

cheers jens
jens maudal
 

PostPost by: elansprint71 » Sun Nov 12, 2006 11:02 pm

Jens,
You need to fabricate a bracket which spans the gap between the carbs
and provides the anchor point for the outer throttle cable. On my car
this has been rather crudely made (by DPO) from scratch, rather than by
chopping bits from the airbox.

Cheers,
Pete.

User avatar
elansprint71
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 4039
Joined: 16 Sep 2003
Location: Cheshire, UK.

PostPost by: rdssdi » Sat Nov 18, 2006 3:14 pm

I have added individual K & N filters to my +2.

They offer a "knock out" at the on the backing plate where a nylon elbow is
attached for crankcase ventilation. Should I run vent lines to both carbs or
only one?

Bob
1969 Elan +2
rdssdi
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1386
Joined: 30 Sep 2003

Total Online:

Users browsing this forum: No registered users and 3 guests