reversing lights
Posted: Sat Aug 14, 1999 9:29 pm
David Croft wrote:
Andres is correct. The switch is located on top between the
Cover and the Bell Housing. It is in line with the
Reverse Shift Rail (the rod inside the trans. case) and is
actuated by it. Not all transmissions came with the switch.
The P.O. installed a close ratio (2.51:1 1st gear) trans.
which did not have the switch and left the wires loose.
During the great rebuild of '95 I drilled and taped the case
for a stock switch which works perfectly.
Don Butler
45/9469
Andres is correct. The switch is located on top between the
Cover and the Bell Housing. It is in line with the
Reverse Shift Rail (the rod inside the trans. case) and is
actuated by it. Not all transmissions came with the switch.
The P.O. installed a close ratio (2.51:1 1st gear) trans.
which did not have the switch and left the wires loose.
During the great rebuild of '95 I drilled and taped the case
for a stock switch which works perfectly.
Don Butler
45/9469