after the embarrassment
2 posts
• Page 1 of 1
Post by: twincamman » Sun Oct 21, 2007 1:45 am
wellll after the ignoble arrival home at the end of a tow rope behind my Buddy's pick up i made a few minor electrical changes and added some shrink tube --new plugs--re timing from 30 degrees advance back to 10--took some push rod off the front brakes -adjusted the bias bar - things ssssure run nice now -- 
-any body know what the 2 rings machined in the front of the cams mean???-ed
-any body know what the 2 rings machined in the front of the cams mean???-eddont close your eyes --you will miss the crash
Editor: On June 12, 2020, Edward Law, AKA TwinCamMan, passed away; his obituary can be read at https://www.friscolanti.com/obituary/edward-law. He will be missed.
Editor: On June 12, 2020, Edward Law, AKA TwinCamMan, passed away; his obituary can be read at https://www.friscolanti.com/obituary/edward-law. He will be missed.
-
twincamman - Coveted Fifth Gear
- Posts: 3175
- Joined: 02 Oct 2003
Post by: rgh0 » Sun Oct 21, 2007 3:28 am
Ed
Lotus machined 2 rings in their D Cams. Originally used in the late Stromberg engined cars and Weber headed Elan Sprints nad Plus 2S 130's. They could be orginal or could by now be reprofiled
cheers
Rohan
Lotus machined 2 rings in their D Cams. Originally used in the late Stromberg engined cars and Weber headed Elan Sprints nad Plus 2S 130's. They could be orginal or could by now be reprofiled
cheers
Rohan
-
rgh0 - Coveted Fifth Gear
- Posts: 8835
- Joined: 22 Sep 2003
2 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 26 guests
Site map
SitemapIndex
RSS Feed