Lotus Elan

Elan S2

PostPost by: fastradio2 » Thu Oct 23, 2003 8:32 pm

Hi,

I've got an Elan with a clutch problem....and am curious as to the best way to proceed:

Pull Engine
Pull Gearbox, or
Pull Entire drivetrain

Appreciate the help.


Regards,
David
fastradio2
New-tral
 
Posts: 2
Joined: 13 Oct 2003

PostPost by: Elanman99 » Thu Oct 23, 2003 9:01 pm

If its a two seater Elan you need to remove the engine only unless you have a Spyder chassis because the engine/gearbox wont come out in one unit.

Ian Phillips
68 Elan S4 DHC. Built in a weekend from a kit (just like the advert said)
User avatar
Elanman99
Third Gear
Third Gear
 
Posts: 412
Joined: 11 Sep 2003
Location: Sandiway, Cheshire UK

PostPost by: fastradio2 » Fri Oct 24, 2003 2:07 am

It's an S2 roadster...
Engine looks like a snap to remove!
Thanks...

David
fastradio2
New-tral
 
Posts: 2
Joined: 13 Oct 2003

PostPost by: Bill » Fri Oct 24, 2003 5:06 am

The engine / trans WILL come out as an assembly (tight fit) on a S2.

Done it a time or 2

Bill - 26/0538
Bill Rathlef
Vancouver Island, Canada
"Keep your stick on the ice, boys."
User avatar
Bill
Fourth Gear
Fourth Gear
 
Posts: 632
Joined: 05 Oct 2003
Location: Vancouver Island, Canada

PostPost by: raygon » Fri Oct 24, 2003 9:32 am

Can anyone confirm they have removed a engine gearbox togther on a sypder space frame chssi for future reference.Last year I tried doing it but was unsucessful and had to split the engine and gearbox :o
raygon
New-tral
 
Posts: 4
Joined: 30 Sep 2003

PostPost by: jrwiseman » Fri Oct 24, 2003 2:13 pm

I replaced the clutch in my S2 last year. Advice I got was about
50/50 for either way. I ended up pulling the engine and tranny
together as a single unit. It is a tight fit and took a bit of fooling
around to get it in and out. If you pull it as one unit, make sure
you get a lift setup that can easily change the angle of the
engine/tranny combo. It needs to go in steep and then level out
as you get further in :)

good luck
John

PS this was the original lotus frame
User avatar
jrwiseman
First Gear
First Gear
 
Posts: 40
Joined: 15 Sep 2003
Location: Copley, OH USA

PostPost by: steve » Fri Oct 24, 2003 4:45 pm

you can remove the engine and box together from a spyder chassis ,if your really clever you can remove it from underneath :o :blink: ;)
"everyone wants a piece of me and it hurts "<br>when my right leg starts shaking thats when i know i am having fun !
steve
First Gear
First Gear
 
Posts: 29
Joined: 12 Sep 2003

Total Online:

Users browsing this forum: No registered users and 14 guests