Help with a working Zetec Plus 2 Map
Posted: Wed Jun 15, 2005 1:36 pmCalling Spyder Zetec +2 owners.
I'd be really grateful if someone could e-mail me a known working Emerald ECU Map for a standard 2L Zetec with standard cams, Jenvey TBs plus Emerald 3d installation.
I think the one I'm using (Spyda3.fig) may be corrupted, as I've run out of other ideas (except for dodgy fuel).
background is...
Still having problems getting my Zetec +2 to run anything like sensibly. It'll start, but then not idle, and have erratic throttle control anything below about 2,500 RPM.
TB's seem balanced, spark plugs are all sparking, Plugs are getting very sooty when running, but seems to indicate presence of fuel in all cylinders. I've checked the cam timing, it's all correct. I've also now screened the cable from the cam sensor, in case it was an interference problem.
Other ideas gratefully welcomed.
Regards,
Niall
Phonetic email: niallATgreenbanksDOTu-netDOTcom
I'd be really grateful if someone could e-mail me a known working Emerald ECU Map for a standard 2L Zetec with standard cams, Jenvey TBs plus Emerald 3d installation.
I think the one I'm using (Spyda3.fig) may be corrupted, as I've run out of other ideas (except for dodgy fuel).
background is...
Still having problems getting my Zetec +2 to run anything like sensibly. It'll start, but then not idle, and have erratic throttle control anything below about 2,500 RPM.
TB's seem balanced, spark plugs are all sparking, Plugs are getting very sooty when running, but seems to indicate presence of fuel in all cylinders. I've checked the cam timing, it's all correct. I've also now screened the cable from the cam sensor, in case it was an interference problem.
Other ideas gratefully welcomed.
Regards,
Niall
Phonetic email: niallATgreenbanksDOTu-netDOTcom