Page 1 of 1

Has anyone actually completed a T5 install?

PostPosted: Tue Mar 06, 2018 2:06 am
by cudabenefast
I have a solution for the bell housing to a twin cam and a commercially available rear housing that puts the shift lever at 11.5" vs stock 10.75" from the front face of the 'box.

I would like to know if anyone has successfully installed the T5 main case into an élan and what mods were required to achieve it.

Thanks Peter

Re: Has anyone actually completed a T5 install?

PostPosted: Tue Mar 06, 2018 6:36 pm
by TomR
I have. Do a search on me or T5 and you'll find plenty of details. Great ratios and very light but definitely requires some work. TomR

Re: Has anyone actually completed a T5 install?

PostPosted: Tue Mar 06, 2018 8:19 pm
by cudabenefast
Tom, your reply is so timely and the shots are great thanks Peter.