Tiger/ERA Zetec sump anyone on here fitted one?

Print view
Post a reply

PostPost by: berni29 » Thu Jun 01, 2023 7:01 pm

Hi All

Anyone here fitted a Tiger/ERA sump to their Zetec engined +2? I am thinking in terms of ground clearance. My back of the envelope calculations put the base of sump at a similar level to the main beam/vacuum member at the front of the chassis. In which case it would be fine...........

While I am here, what is the best choice for a water rail. The Retroford one looks the slimmest one.........

Many thanks

Berni
Zetec+ 2 under const, also 130S. And another 130S for complete restoration. Previously Racing green +2s with green tints. Yellow +2 and a couple of others, all missed. Great to be back 04/11/2021 although its all starting to get a bit out of control.
User avatar
berni29
Fourth Gear
Fourth Gear
 
Posts: 793
Joined: 10 Mar 2004
Top

PostPost by: john.p.clegg » Fri Jun 02, 2023 4:30 am

Berni
I fitted one in my Moggie, so no help there....but , had to remove the splash tray and drill a hole for the dip-stick to pass through....

John ;-)
User avatar
john.p.clegg
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 5747
Joined: 21 Sep 2003
Top

PostPost by: berni29 » Fri Jun 02, 2023 9:56 pm

Hi

That sounds like an interesting car!

Berni
Zetec+ 2 under const, also 130S. And another 130S for complete restoration. Previously Racing green +2s with green tints. Yellow +2 and a couple of others, all missed. Great to be back 04/11/2021 although its all starting to get a bit out of control.
User avatar
berni29
Fourth Gear
Fourth Gear
 
Posts: 793
Joined: 10 Mar 2004
Top
Post a reply
Return to Mods
Unanswered Posts • Active Topics

Total Online:

Users browsing this forum: No registered users and 2 guests

Site map Site map • SitemapIndex SitemapIndex • RSS Feed RSS Feed • Channel list Channel list • FAQ • Delete all board cookies