Spyder Zetec spring rates......

Print view
Post a reply

PostPost by: berni29 » Tue Jun 27, 2023 9:40 pm

Hi

My Spyder Zetec chassis with the RSC has rear springs marked 1.9 x 16.25 x 100lbs.

Does anyone know if these are standard for this application?

The obvious thing to do would be to contact Spydercars, but I have done that by email and telephone already and drawn a blank.

All the best

Berni
Zetec+ 2 under const, also 130S. And another 130S for complete restoration. Previously Racing green +2s with green tints. Yellow +2 and a couple of others, all missed. Great to be back 04/11/2021 although its all starting to get a bit out of control.
User avatar
berni29
Fourth Gear
Fourth Gear
 
Posts: 793
Joined: 10 Mar 2004
Top

PostPost by: elan66 » Wed Jun 28, 2023 7:30 pm

Hi Berni,
Alan (spyderfan) has just changed his shocks and springs all round and car drives very well, drop him a PM,
Cheers P
elan66
Second Gear
Second Gear
 
Posts: 200
Joined: 01 Jun 2011
Top

PostPost by: berni29 » Tue Oct 17, 2023 5:02 pm

Hi

I just realised that I did not close off this thread, yes the 100lbs springs are standard for the Spyder +2.

Having said that they are quite long do I did cut the Spyder spring perches down.....

Thanks

Berni
Zetec+ 2 under const, also 130S. And another 130S for complete restoration. Previously Racing green +2s with green tints. Yellow +2 and a couple of others, all missed. Great to be back 04/11/2021 although its all starting to get a bit out of control.
User avatar
berni29
Fourth Gear
Fourth Gear
 
Posts: 793
Joined: 10 Mar 2004
Top
Post a reply
Return to Mods
Unanswered Posts • Active Topics

Total Online:

Users browsing this forum: No registered users and 5 guests

Site map Site map • SitemapIndex SitemapIndex • RSS Feed RSS Feed • Channel list Channel list • FAQ • Delete all board cookies