Bosch 0 221 503 700 Coil terminals
6 posts
• Page 1 of 1
I am fitting a Bosch 0 221 503 700. Coil (no distributor) I got it from QED, but they do not answer me.
I am in the states, and having trouble finding spark plug wires. I am not familiar with the coil terminal type, and have had no luck finding info. I know off Opel Astra (not sold here) but while I can get wires for those, not likely will the be right length.
If anyone knows the terminal type name or other info I would greatly appreciate help
Thanks
Mark
I am in the states, and having trouble finding spark plug wires. I am not familiar with the coil terminal type, and have had no luck finding info. I know off Opel Astra (not sold here) but while I can get wires for those, not likely will the be right length.
If anyone knows the terminal type name or other info I would greatly appreciate help
Thanks
Mark
1966 Lotus Elan S3- Benelli motorcycles (various)
- Lotus54
- Second Gear
- Posts: 105
- Joined: 10 Oct 2023
Here's a link to the magnecor custom HT lead page. It may give you some ideas. I would have thought you could have got them custom made in the USA. I find the magnecor ones very good. I am using a Valeo coil pack which might be the same as yours.
https://www.magnecor.co.uk/wp-content/u ... 011pdf.pdf
Cheers
John
https://www.magnecor.co.uk/wp-content/u ... 011pdf.pdf
Cheers
John
- elanman999
- Third Gear
- Posts: 487
- Joined: 12 Nov 2005
Contact Ivey Engines in Portland, OR. Colin or Cameron Ivey. They will have Taylor wires with whatever terminals you need. They build and tune Twincams. www.iveyengines.com
The other source is Omnitech Engineering in uptown Bellingham, also a Twincam builder in https://omnitech-engineering.com/category/home
The other source is Omnitech Engineering in uptown Bellingham, also a Twincam builder in https://omnitech-engineering.com/category/home
There is no cure for Lotus, only treatment.
-
StressCraxx - Coveted Fifth Gear
- Posts: 1432
- Joined: 26 Sep 2003
Thanks for the ideas.
On a good day I can see Bellingham area and Portland is only about 5 hours away.
This is a very non-standard setup, but now that I am pretty sure I know the coil terminals.
Thank you
On a good day I can see Bellingham area and Portland is only about 5 hours away.
This is a very non-standard setup, but now that I am pretty sure I know the coil terminals.
Thank you
1966 Lotus Elan S3- Benelli motorcycles (various)
- Lotus54
- Second Gear
- Posts: 105
- Joined: 10 Oct 2023
6 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 3 guests