Lotus Elan

Elan Spin-Easy Wheel Spinner Tool - new photos.Latest stock

PostPost by: keithc913 » Mon Mar 28, 2011 3:35 pm

If anybody would like to purchase an Elan Wheel Spinner tool please either pm or email me,as I have several of these for sale.Brand new.£125 + £8.50 p&p (no vat) to UK mainland.I can ship worldwide - please contact me for rates.

These were featured in the July 2009 Club Lotus News and are a handy tool which locks on to the spinner allowing easy and safe loosening and tightening to the correct torque.No need for hammers and skinned knuckles or damaged wheels !

They're manafactured from aircraft grade aluminium,lightened and hard anodised with a chemi-blacked steel hex for use with a socket - 32mm and torque wrench - 200/220 ft lbs tightening setting (which are not supplied - you'll have to buy your own !).Also,if interested will need to know what wheels you have - i.e. Minilites,26R or Standard,as the Minilite tool is slightly different.

Over 70 sold now and no complaints so far ! Full money back refund if not entirely satisfied.

I'm happy to provide any further information required.

West Sussex,UK based.
Attachments
Elan spinner tool 2.JPG and
Elan spinner tool.JPG and
Last edited by keithc913 on Sun Dec 17, 2017 9:19 am, edited 10 times in total.
keithc913
First Gear
First Gear
 
Posts: 28
Joined: 28 Mar 2011
Location: West Sussex,UK

PostPost by: john.p.clegg » Mon Mar 28, 2011 4:20 pm

"I'm happy to provide any further information required."

First question that comes to mind is £??????

John :wink: :wink:
User avatar
john.p.clegg
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 5530
Joined: 21 Sep 2003
Location: Manchester

PostPost by: adigra » Thu Mar 31, 2011 12:11 am

I am interested and have emailed. Thank you.

Adi
1967 Elan S3 S/E FHC
User avatar
adigra
Fourth Gear
Fourth Gear
 
Posts: 571
Joined: 01 May 2009
Location: West Yorkshire

PostPost by: keithc913 » Thu Mar 31, 2011 4:10 am

Adi,

Thanks - you have an email as well.

Keith.
keithc913
First Gear
First Gear
 
Posts: 28
Joined: 28 Mar 2011
Location: West Sussex,UK

PostPost by: adigra » Thu Mar 31, 2011 9:02 am

Just an edit to remove my email address and to say that Keith is very nice to deal with.

Adi
1967 Elan S3 S/E FHC
User avatar
adigra
Fourth Gear
Fourth Gear
 
Posts: 571
Joined: 01 May 2009
Location: West Yorkshire

PostPost by: keithc913 » Sat Apr 02, 2011 7:38 am

Thank you !
keithc913
First Gear
First Gear
 
Posts: 28
Joined: 28 Mar 2011
Location: West Sussex,UK

PostPost by: adigra » Sat Apr 02, 2011 2:36 pm

Received the tool. Looks and feels fantastic. The car is in the shop at the moment so can't try it out, but I don't foresee any issues as it seems a very well engineered tool.

Thank you Keith.

Adi
1967 Elan S3 S/E FHC
User avatar
adigra
Fourth Gear
Fourth Gear
 
Posts: 571
Joined: 01 May 2009
Location: West Yorkshire

PostPost by: keithc913 » Sat Apr 02, 2011 2:40 pm

Adi,

I'm pleased that you're pleased !

Thanks again
Keith.
keithc913
First Gear
First Gear
 
Posts: 28
Joined: 28 Mar 2011
Location: West Sussex,UK

PostPost by: keithc913 » Tue Apr 05, 2011 5:20 am

Due to the popularity of these useful tools, I'm getting low on stock but there are more about to be manafactured.
keithc913
First Gear
First Gear
 
Posts: 28
Joined: 28 Mar 2011
Location: West Sussex,UK

PostPost by: keithc913 » Wed Apr 06, 2011 8:39 am

Sorry everybody but due to circumstances way beyond my control - i.e. the recent Royal Mail increase in postal charges - p&p on these will now be £8.50.
keithc913
First Gear
First Gear
 
Posts: 28
Joined: 28 Mar 2011
Location: West Sussex,UK

PostPost by: oldelanman » Wed Apr 06, 2011 3:38 pm

Received mine this morning and I too am very pleased with it - a good design very well made and very promptly despatched. Oh and it works too ! Would recommend it.

Regards,
Roger
S4 DHC
oldelanman
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1482
Joined: 02 Jan 2008
Location: Dorset UK

PostPost by: keithc913 » Sun Apr 10, 2011 1:47 pm

Only one 'Standard' tool left now but more on their way - approx.3 weeks delivery.

Thanks to all that have shown interest !
keithc913
First Gear
First Gear
 
Posts: 28
Joined: 28 Mar 2011
Location: West Sussex,UK

PostPost by: martinbrowning » Mon Apr 11, 2011 6:05 pm

Mine arrived in the post today - really well made. Very happy with it

Martin B
Time flies like an arrow; fruit flies like a banana.
72 Europa Special, 72 Sprint, 72 Plus 2
martinbrowning
Third Gear
Third Gear
 
Posts: 322
Joined: 07 Jun 2007
Location: Belfast

PostPost by: keithc913 » Mon Apr 11, 2011 6:11 pm

Cheers Martin

We aim to please !
keithc913
First Gear
First Gear
 
Posts: 28
Joined: 28 Mar 2011
Location: West Sussex,UK

PostPost by: oillite » Wed Apr 13, 2011 10:16 pm

Received my spin-easy tool this morning so it was up into the shed to have a rummage in my old big tools. I used to be a hgv mechanic and dug out a 3/4" square drive 32mm socket and ratchet with a 4ft long exstened handle and gave it a go.
Guess what it works a treat, no more whacking with that ruddy hammer!
Well done Keith very pleased with the tool! :D
oillite
First Gear
First Gear
 
Posts: 43
Joined: 03 Sep 2010
Location: East London
Next

Total Online:

Users browsing this forum: seniorchristo, SGO 2F and 4 guests