Lotus Elan

Adaptors for removing rear hubs-elan or plus 2

PostPost by: worzel » Tue May 24, 2016 6:27 pm

img_0878.jpg and
img_0878.jpg and
img_0878.jpg and
img_0878.jpg and
Hi

Selling off stuff I've accumulated over the years.

Pair of special adaptors that screw onto the hub wheel thread (left and right hand threads).

The puller then is applied to the adaptors to avoid damaging the threads.

£50 the pair plus carriage.

Plus a pair of brand new A frames for a two seater elan. Made by TTR but I never got around to fitting them.
These are fully adjustable to alter toe-in whilst still on the car.

Originally TTR designed them such that adjustment meant having to remove them but I had them altered to remove this requirement. The design means that no strain is placed on the frames when adjusting as this is carried out immediately adjacent to the chassis by means of a locking nut system (hope the photographs explain this point).

All new bushes in them as well.

Cost me £350 from TTR plus altering them added another £200 odd to the bill.

£500 the pair plus carriage.

Contact either via the forum or direct on [email protected]" target="_blank or ring 0151 480 8400

John


Regards

PS apolgies fior the unnecessary duplication- don't know how that happened!
Attachments
img_0881.jpg and
img_0880.jpg and
img_0879.jpg and
worzel
Fourth Gear
Fourth Gear
 
Posts: 696
Joined: 13 Jan 2004

PostPost by: davidc » Wed May 25, 2016 10:12 am

John

those hub puller adaptors sound useful so yes please.

you look to be a local number so i'll probably collect if that would be OK?

David
davidc
Second Gear
Second Gear
 
Posts: 151
Joined: 25 Sep 2015
Location: Wirral, UK

Total Online:

Users browsing this forum: No registered users and 5 guests