Hi, I have a undrilled/untapped galvanised Lotus replacement chassis for the +2 available, the item was purchased from Mick Miller 05/09/13 (invoice available) by the previous owner who decided to go the Spyder route, I purchased in 2016. I myself am now going down the same route due the the fitment of a fuel injected BDG. The chassis was painted by the previous owner but this had began to flake, I decided to remove the paint gently and fit bare, the chassis is currently 90% stripped with just the awkward bits to finish. I don't have the shim pack but do have the measurements (0.035), I had removed the brake pipe "tangs" under the chassis with the intention of using rubber lined P clips, a much neater solution in my opinion. The chassis is as new and ready to fit, £400ono, any questions please PM me, cheers, Rob.
Last edited by bertavfc on Thu May 30, 2019 6:20 pm, edited 1 time in total.