Page 1 of 1

Final drive casing and inner d/shafts

PostPosted: Sat Nov 23, 2019 4:01 pm
by promotor
Late type final drive casing ie with big ears.

All good threads for brass plugs as well as the 8 mounting bolt holes.

No repairs been done.

Circlip grooves good condition.

Has been vapour blasted not too long ago.

Has a bit of damage inside near a bolt hole - this is near to a bolt hole but doesn't leak - I've put thinners inside the hole and it doesn't seep through.

dsc05998.jpg and


dsc05999.jpg and


dsc06000.jpg and


dsc06001.jpg and


dsc06002.jpg and


£135 + post for the casing.

Driveshafts - these are the later, thicker type.

They were safety spec shafts which have had part of the stub removed for use in non-safety spec set-up. Could use as is but ideally need cutting down / tidying up.

Good condition splines and oil seal surfaces.

Bearings could do with replacing.

dsc06004.jpg and


dsc06005.jpg and


dsc06006.jpg and


dsc06007.jpg and


£85 + post.

Re: Final drive casing and inner d/shafts

PostPosted: Sat Nov 23, 2019 4:19 pm
by alanr
I would like the Driveshafts please. PM sent.

Alan.

Re: Final drive casing and inner d/shafts

PostPosted: Tue Nov 26, 2019 7:04 pm
by promotor
alanr wrote:I would like the Driveshafts please. PM sent.

Alan.


Now on their way to you Alan. Cheers for your purchase!

Re: Final drive casing and inner d/shafts

PostPosted: Wed Nov 27, 2019 3:22 pm
by l10tus
Can I buy the diff case please?

Re: Final drive casing and inner d/shafts

PostPosted: Sat Dec 07, 2019 8:56 pm
by promotor
Thanks for the interest, the final drive casing is now sold.