S3 glove box lid missing bits
4 posts
• Page 1 of 1
Started to fit the dash to my S3 FHC but I am missing the glove box catch, the glove box lid has a pull down handle but no lock I think the lock was only fitted to DH cars.
The bits I don?t have are the catch that hold the lid closed.
Looking at the parts manual this seems like a clasp that fixes to the top of the glove box and a die cast pin fixed to the lid.
Also looks like a length of flex! Holding the lid in the open position.
Does this makes sense to any one. Photos would be helpful so I can start looking for the right bits.
Brian
The bits I don?t have are the catch that hold the lid closed.
Looking at the parts manual this seems like a clasp that fixes to the top of the glove box and a die cast pin fixed to the lid.
Also looks like a length of flex! Holding the lid in the open position.
Does this makes sense to any one. Photos would be helpful so I can start looking for the right bits.
Brian
Last edited by badback on Tue Apr 28, 2009 9:56 pm, edited 1 time in total.
- badback
- First Gear
- Posts: 32
- Joined: 13 Apr 2007
Have a look here
elan-f14/glove-box-lock-catch-t17859.html
elan-f14/glove-box-lock-catch-t17859.html
Brian
64 S2 Roadster
72 Sprint FHC
64 S2 Roadster
72 Sprint FHC
-
types26/36 - Coveted Fifth Gear
- Posts: 3877
- Joined: 11 Sep 2003
Brian, here are some shots of my original glove box. Hope that helps.
Sarto
Sarto
- Attachments
lotus elan 1966 S3 FHC
36/5785
LHD
36/5785
LHD
-
mac5777 - Fourth Gear
- Posts: 537
- Joined: 05 Jul 2004
4 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 21 guests