Lotus Elan and Lotus Elan Plus 2 Forums

Finally rebuilt door frames re chromed , new base brass pulleys and modified stainless cable clamps which house the cable in the head so the clamp can be tightened on the glass level

Photo of clamp

thank you for the photos. Did you do the cable lock yourself?

Yes , machined from a M10 316 cap head machined down with a close fitting shoulder through glass . 1/4 unf. Thread and a 4mm internal thread for grub screw

nice workmanship shawn!! ........looks like swiss precision - congrats sandy

The internal grub screw is a real advantage over the original set up. I used recently a similar design from Alex Black when replacing a broken cable.