Lotus Elan and Lotus Elan Plus 2 Forums

Hello all,

after a few weeks I did some progress. It was not easy to find all spots where the Body was bolt on the chassis.
Because some decades ago somebody added extra bolts.
But finally i did it.
Surprise that the chassis has a strange damage. I added some pics.
Maybe somebody of you has an explanation where the bump in the chassis came from.

thanks a lot

rolf

I think the damage to the frame is from a rotoflex failing and flailing around. Same on my car. Gary

I was thinking rotoflex damage too.

Thanks a lot,

that sounds realistic.

rolf

ou bien en essayant de sortir le pont par le cot? en repliant l?g?rement la partie du chassis !

I've seen this damage before, too. I always assumed it was where the chassis had been "adjusted" to allow easier removal of the diff.

Almost certainly a rotoflex explosion and the driveshaft getting wedged up into the chassis

I agree, roto flex failure damage. Have similar but worse in my car.

Are the donuts installed the wrong way? looks like driveshaft is fitted to low donut boss, nut to high boss.
Shouldn't it be the other way?
That's how DPO did with my car
It does create permanent tension in the donuts.
Anna

I have evidence of similar damage to my chassis as a result of donut failure-a arm too!

I would agree the rotoflexes appear to be the wrong way around.

Peter

+1 fitted wrong
Alan

Yep.
Definetly donut failure, same on my car .
Damage from a previous owner.
It will never happen again I have now installed Elan Trikbits CV conversion . I would give it them serious consideration for the future . They are an excellent improvement and this will never happen again..