Page 1 of 1

S3 hood tray aluminum trim and binding screws

PostPosted: Tue Apr 16, 2019 5:47 pm
by rcombs
Has anyone had any luck at finding replacements for the hood tray trim and binding screws?

My trim is pretty rough and has had a bunch of extra holes drilled into it. I have been looking on the internet and haven't found anything yet.

The same with the binding screws. The ones I have found don't look anything like the originals.

Thanks,
Rick

Re: S3 hood tray aluminum trim and binding screws

PostPosted: Tue Apr 16, 2019 7:28 pm
by 1owner69Elan
Sue Miller sells both these items, I believe. They are in her catalogue.

Re: S3 hood tray aluminum trim and binding screws

PostPosted: Tue Apr 16, 2019 7:36 pm
by richardcox_lotus
If not Sue, try sj sportscars as he has a website - look up the term “Hood Tray”

Re: S3 hood tray aluminum trim and binding screws

PostPosted: Tue Apr 16, 2019 7:47 pm
by rcombs
Thanks,
I'll give them a try.

Re: S3 hood tray aluminum trim and binding screws

PostPosted: Tue Apr 16, 2019 8:01 pm
by elanfan1
Also Woolies

Re: S3 hood tray aluminum trim and binding screws

PostPosted: Fri Apr 19, 2019 3:28 am
by Elan45
Back 30 years more or less, no one made many parts like this, so I made up a jig to hold them to put in the slot and made a set out of 316 SS bar stock. They are still on my SS dhc.

Roger

Re: S3 hood tray aluminum trim and binding screws

PostPosted: Fri Apr 19, 2019 9:38 am
by pharriso
I think the fasteners are called "twinfasts"