Help required - S2 door assembly
Posted:
Sat Jun 22, 2019 12:06 pm
by PaulH
Hello,
Can someone assist me with some reference pictures for the assembly of an Elan S2 door. I have a small bracket that fixes to the inside top edge near the front. I think it must be to hold the outer weather strip somehow. Pictures of the bracket below:
Fingers crossed someone can help.
Paul
Re: Help required - S2 door assembly
Posted:
Sat Jun 22, 2019 3:06 pm
by Emma-Knight
Paul, at the position of the front windowchannel, there is an upright slot in the inner door skin, with a small drilling. This will accept a long reach spire clip. This is were the screw goes, with the alluminium angle to hold the crome weather strip assy to the upper door edge.
Anna
Re: Help required - S2 door assembly
Posted:
Sat Jun 22, 2019 4:06 pm
by PaulH
Emma-Knight wrote:Paul, at the position of the front windowchannel, there is an upright slot in the inner door skin, with a small drilling. This will accept a long reach spire clip. This is were the screw goes, with the alluminium angle to hold the crome weather strip assy to the upper door edge.
Anna
Thank you Anna, I'll have a go and see if I can make sense of it.
Re: Help required - S2 door assembly
Posted:
Sun Jun 23, 2019 7:56 pm
by Frogelan
Paul
I didn't even know this part existed..but I'm looking forward to seeing a detailed assembly!
Many thanks!
A