Plus 2 Seats.

PostPost by: bill_s708800 » Fri Jul 02, 2004 2:23 pm

Does anyone know where I can get replacements for the black rubber diaphram that provides the support under the seats on a +2S? Alternatively which car did they originate from?

Bill
bill_s708800
First Gear
First Gear
 
Posts: 23
Joined: 24 Sep 2003

PostPost by: cdraper » Tue Jul 06, 2004 6:21 am

Had the same problem - my trimmer replaced them with plywood - and new foam - the seats are surprisingly comfortable!! If your seat is stripped you should also strenghten the frame at the back as then tend to break/bend here.
Chirs Draper
cdraper
Second Gear
Second Gear
 
Posts: 79
Joined: 22 Oct 2003

PostPost by: roadterror » Tue Jul 06, 2004 3:43 pm

And add a headrest too..... removable when you need to use the back seats. Mine has a specially made piece of canvas and new foam. Very comfortable....
roadterror
Second Gear
Second Gear
 
Posts: 102
Joined: 12 Mar 2004

PostPost by: berni29 » Fri Jul 23, 2004 7:19 pm

Is it true that the American spec +2's had high back seats with built in headrests? The lack of head restraints is the only thing that I do not like about my +2. That and the fact that it is in bits at the moment.
Zetec+ 2 under const, also 130S. And another 130S for complete restoration. Previously Racing green +2s with green tints. Yellow +2 and a couple of others, all missed. Great to be back 04/11/2021 although its all starting to get a bit out of control.
User avatar
berni29
Fourth Gear
Fourth Gear
 
Posts: 790
Joined: 10 Mar 2004

PostPost by: simon.mitchell » Fri Jul 23, 2004 8:54 pm

I've seen a Plus 2 with X1/9 seats fitted, which of course have head restraints. Looked good too...

Simon
User avatar
simon.mitchell
Second Gear
Second Gear
 
Posts: 148
Joined: 12 Sep 2003

PostPost by: 1964 S1 » Sat Jul 24, 2004 4:00 am

Hello Berni 29,
My US version '69 +2 has the original high backed seats. Safety good, practicality bad. When tilted forward the headrest enters the (original) headliner long before its desired forward tilt position. So far, one small tear on passenger side headliner but I know more are coming. If you don't "need" access to the rear seats they're great. I think the X1/9 seat idea sounds great. There are many choices for alternative seats that hinge at the base. Geo Metro LSi, (Vauxhall?) Suzuki Swift, some "hot rod" Toyota, Subaru, and Honda models have terrific seats. Salvage yards, here we come. Keep the originals for resale value, get comfortable in something newer, lighter and ?safer.
1964 S1
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1472
Joined: 15 Sep 2003

PostPost by: 1964 S1 » Sat Jul 24, 2004 4:11 am

And Hello Bill, sorry, got side tracked
I put 1/2 inch high density foam bedding cut to fit (made for camping/sleeping) between my springs and vinyl seat material. It's working great and was real easy to install after removing the seat.
1964 S1
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1472
Joined: 15 Sep 2003

PostPost by: Dave_Newcastle » Fri Jul 30, 2004 7:04 pm

I support the suggestion to strengthen the back supports. Mine broke just above the pivot points. (Its circular tube)
Dave_Newcastle
Second Gear
Second Gear
 
Posts: 102
Joined: 12 Sep 2003

Total Online:

Users browsing this forum: No registered users and 14 guests