Plus 2 Windscreen Rubber

PostPost by: niallf » Tue Sep 14, 2004 6:43 pm

I think I know the answer to this, but before I put back my w/screen using an early type rubber.

Is it possible to source the rubber to take the Consul/Capri Stainless Surround ?
User avatar
niallf
Second Gear
Second Gear
 
Posts: 216
Joined: 19 Sep 2003

PostPost by: theelanman » Wed Sep 15, 2004 8:02 am

I think the usual culprits in the UK can get it.....PM CN and SJS.......about ?1.50 per meter if I remember
cheers
G
User avatar
theelanman
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1434
Joined: 17 Sep 2003

PostPost by: niallf » Thu Sep 16, 2004 11:42 pm

PM don't have it and I'm pretty sure CN don't either.

SJS are ? - figured it out, but they don't list it.
User avatar
niallf
Second Gear
Second Gear
 
Posts: 216
Joined: 19 Sep 2003

PostPost by: worzel » Fri Sep 17, 2004 7:34 am

Hi

Early Plus 2 use the same rubber as the reliant Scimitar Gte models (the Se5/Se5a up to 1976) if I'm not mistaken. Try Graham Walker Ltd on 01244 381777- they usually have them.

Regards

John
worzel
Fourth Gear
Fourth Gear
 
Posts: 626
Joined: 13 Jan 2004

PostPost by: mgb2010 » Fri Sep 17, 2004 11:30 am

Hi,
I believe that the company below makes rubber extrusions, including windscreen surrounds.

<a href='http://www.coh-baines.co.uk' target='_blank'>http://www.coh-baines.co.uk</a>

MGB
mgb2010
First Gear
First Gear
 
Posts: 15
Joined: 30 Sep 2003

PostPost by: Hamish Coutts » Sat Sep 18, 2004 8:59 am

Hi,

Try the people below.

<a href='http://www.woolies-trim.co.uk' target='_blank'>http://www.woolies-trim.co.uk</a>

Regards,

Hamish :)
"One day I'll finish the restoration - honest, darling, just a few more years....."
User avatar
Hamish Coutts
Fourth Gear
Fourth Gear
 
Posts: 517
Joined: 29 Jun 2004

Total Online:

Users browsing this forum: No registered users and 27 guests