Drive shafts - the old ones, the new ones and...
Posted: Sun Nov 11, 2018 12:18 pm
When digging in the garage, I found these: one early drive shaft, large PCD, and an "intermediate" one, one side large PCD, one side small PCD.
The later ones just have been drilled in a narrower diameter, fortging/casting remains the same.
Also, the drillings are off angle to the casting with those later shafts I checked. It seems common practice
Cheers. Anna
The later ones just have been drilled in a narrower diameter, fortging/casting remains the same.
Also, the drillings are off angle to the casting with those later shafts I checked. It seems common practice
Cheers. Anna