Page 1 of 1

distributer cap

PostPosted: Thu Nov 17, 2005 8:28 am
by triumphelan
What is the part no`s of the 23D4 distributer cap ,the rightangle one .What size od are the leads

Re: distributer cap

PostPosted: Thu Nov 17, 2005 2:27 pm
by john.p.clegg
7mm

John :wink:

diz cap

PostPosted: Thu Nov 17, 2005 5:01 pm
by john-c-elan+2
Lucas original number was 54412472, Lucas current number I think is
DDB 101, Intermotor ref is 44720, Commercial Ignition (CI) is XD65. That gives u a few choices. 7mm leads fit, 8mm will but you have to carefully drill out the holes in the cap !! jon

Re: distributer cap

PostPosted: Fri Nov 18, 2005 6:56 am
by john.p.clegg
Triumphelan

Your lucky day,try ebay 4591486409

John :wink:

Re: distributer cap

PostPosted: Fri Nov 18, 2005 9:10 am
by wildoliver
I've just completed this job myself, fitted the correct cap, copper leads, rotor arm and caps in place of a plug in cap, modern leads and god knows what rotor arm!

The entire job is very simple and costs in the region of ?25.

If you have difficulty obtaining parts let me know, or if you'd prefer to buy a bolt up kit also let me know I'll supply one with pleasure.

Re: distributer cap

PostPosted: Sat Nov 19, 2005 7:31 am
by triumphelan
Thanks John ,I`m onto it highest bid so far