Lotus Elan

Wiring Diagram +2S

PostPost by: McBiter » Wed Apr 11, 2018 3:45 pm

I've chased many leads through the search and have downloaded an S4 diagram which I hope will point me in the right direction but does a +2 version exist? My Workshop manual does not seem to include one so I'm hoping there's one out there.
McBiter
First Gear
First Gear
 
Posts: 15
Joined: 15 Sep 2009
Location: Kent, UK

PostPost by: alan.barker » Wed Apr 11, 2018 4:38 pm

You need a Lotus +2 Workshop Manuel and all the +2 Wiring Diagrams are at the back
Alan
Alan.b Brittany 1972 elan sprint fhc Lagoon Blue 0460E
alan.barker
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1681
Joined: 06 Dec 2008
Location: BRITTANY FRANCE

PostPost by: crannyr » Wed Apr 11, 2018 4:43 pm

There are at least 4 different diagrams specific to models and year.
crannyr
Second Gear
Second Gear
 
Posts: 132
Joined: 10 Oct 2004
Location: Grafton, MA

PostPost by: Hawksfield » Wed Apr 11, 2018 5:04 pm

Hi

really need your +2 model and year but here is the one for mine what is your model?
wiring-diag.jpg and
Regards

John

+2s130 1971
User avatar
Hawksfield
Third Gear
Third Gear
 
Posts: 361
Joined: 14 Jul 2004
Location: Hartlepool Teesside

PostPost by: gus » Wed Apr 11, 2018 9:32 pm

crannyr wrote:There are at least 4 different diagrams specific to models and year.



OMG there are like 8
gus
Fourth Gear
Fourth Gear
 
Posts: 613
Joined: 05 May 2011

PostPost by: prezoom » Wed Apr 11, 2018 11:51 pm

In addition, mine also has a very vague component location sheet.
Rob Walker
26-4889
50-0315N
1964 Sabra GT
1964 Elva Mk4T Coupe (awaiting restoration)
1965 Ford Falcon Ranchero, 302,AOD,9",rack and pinion,disc,etc,etc,etc
1954 Nash Healey LeMans Coupe

Lotus is a life sentence with no parole
prezoom
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1186
Joined: 16 Mar 2009
Location: Escondido, California

PostPost by: McBiter » Thu Apr 12, 2018 9:15 am

Being a bit of an idiot it didn't occur to me that those blank pages at the end of the electrical section in the manual were folded over and actually diagrams printed over 2 pages.

I blame the manual being immaculate and perfectly folded!

Thanks for all your replies-very helpful.

I assume that a new loom will have the same end connectors as the existing one. Is there an alternative? From memory these were often the cause of poor connections in period.

Once again please forgive my stupidity.
McBiter
First Gear
First Gear
 
Posts: 15
Joined: 15 Sep 2009
Location: Kent, UK

PostPost by: gus » Thu Apr 12, 2018 11:08 am

I would not assume a new loom would be the right thing at all

there are so many variants

What problems are you having specifically?
gus
Fourth Gear
Fourth Gear
 
Posts: 613
Joined: 05 May 2011

PostPost by: GLB » Thu Apr 12, 2018 3:19 pm

I recently fitted a new loom from Autosparks and it fit perfectly. The only problem was that the multipin connectors between the engine and dash looms at the firewall are nla. The looms had the pins but not the connectors so I had to carefully reuse the old brittle plastic connectors.Just be gentle with them when you remove the old ones. Gary
GLB
First Gear
First Gear
 
Posts: 49
Joined: 31 Jan 2018
Location: El Paso, TX USA

Total Online:

Users browsing this forum: No registered users and 5 guests