Need original tach inductive winding bracket
4 posts
• Page 1 of 1
It screws to the vertical post on the back and provides the structure for winding the wire from coil to distributor, creating the inductive tach pickup. While reassembling the dash, I find my original bracket has gone missing.
If you have upgraded your tach or have an extra bracket, please PM me with price. Thx.
If you have upgraded your tach or have an extra bracket, please PM me with price. Thx.
Weldon
the dreaded PO himself
the dreaded PO himself
- toggle45
- First Gear
- Posts: 24
- Joined: 01 Apr 2010
Sorry Weldon, I already gave mine away to another forum member with the same issue. For anyone rewiring their car, it is easy to inadvertently toss this fitting as it typically remains attached to the old loom wire by the plastic retaining piece. .
Anyway, I was trying to find a picture of the part you need, and came across this nicely done repair guide for the old Smiths tachs. Page 6 has a couple of good pictures, and some suggestions on making one if you can?t get the original.
http://www.triumphclub.co.nz/wp-content ... Smiths.pdf
Although I have not checked, I wonder if the speedometer shops that do the RVI to RVC conversions (Nissonger, North Hollywood Speedometer, etc.) might have the part? Once the conversion is completed the inductive loop fitting is no longer required, so they may have some around?
HTH
Stu
Anyway, I was trying to find a picture of the part you need, and came across this nicely done repair guide for the old Smiths tachs. Page 6 has a couple of good pictures, and some suggestions on making one if you can?t get the original.
http://www.triumphclub.co.nz/wp-content ... Smiths.pdf
Although I have not checked, I wonder if the speedometer shops that do the RVI to RVC conversions (Nissonger, North Hollywood Speedometer, etc.) might have the part? Once the conversion is completed the inductive loop fitting is no longer required, so they may have some around?
HTH
Stu
Stu
1969 Plus 2 Federal LHD
1969 Plus 2 Federal LHD
-
stugilmour - Coveted Fifth Gear
- Posts: 2068
- Joined: 03 Sep 2007
I?m currently trying to get my tacho to work so it?s in and out a few times, next time I could photo and measure it if that would help. Won?t be till mid next week though as I?m away from home.
Change is inevitable, except from a vending machine!
- Bigbaldybloke
- Fourth Gear
- Posts: 894
- Joined: 16 May 2017
4 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 13 guests