Page 1 of 1

washer button

PostPosted: Wed May 08, 2019 4:14 pm
by lotusbzz
hallo my Friends!
anybody can help me to wire the washer button of my S4?
this is what I can do to make it running but just one speed, the second speed is missing ( no idea if it's the fast or slow speed) .
1) when the button in all down everything is off
2) first click : the washer works
3) when the button is all up nothing works
4) switching from all up to all down the park works and moves the arm to park position
washe-button-01-2.jpg and
washer button view from top


washe-button-01-3.jpg and


which one of the wires gives the fast speed ?

ciao a tutti
Paolo

Re: washer button

PostPosted: Wed May 08, 2019 5:01 pm
by ncm
Hi, you might find this thread has some useful information.
viewtopic.php?f=38&t=15732

Brian.

Re: washer button

PostPosted: Wed May 08, 2019 5:01 pm
by pharriso
Just been through this myself...This is from my Federal Sprint:
windshieldwiperswitch_connections.jpg and


& from my notes I have:

Terminal 1 = Gr/Wh = +12v Supply
Terminal 2 = Gr/Br = Fast
Terminal 5 = Gr/R = Park
Terminal 6 = U/Gr = Slow

Re: washer button

PostPosted: Wed May 08, 2019 5:12 pm
by ncm
Looking at the picture that Phil has just posted you can see that the two middle terminals are connected together . It's not totally clear from your picture , but your switch appears to have separate terminals . Maybe connecting them together will get your wipers working properly?

Brian.

Re: washer button

PostPosted: Wed May 08, 2019 8:24 pm
by lotusbzz
... middle spades of the button are connected