Spyder headlamp lift

[JeffP]

I've installed a new Spyder electric headlamp lift system in my '69 Elan Plus2. Everything works fine both manually and with power to the motor, UNTIL i install the sealed beam units.

With the extra weight the pods only open halfway, despite the crank on the motor appearing to be fully extended. I've re-installed the system and tried endless variations of adjustments, but still get the same result.

Any ideas re what's wrong? Not enough torque to the motor? Any suggestions very welcome.

[h20hamelan]

Manually with lamps in?

edit: this is how you have it in the photos?

https://www.spydercars.co.uk/electricy- ... an-elan-2/

[spyzee]

Hi JeffP

Are you using the correct spring and is it able to function freely?