Exhaust Clamps

[rjaxe]

Recently fitted a set of Mikalor clamps to my Plus 2 exhaust. These are far superior to anything I have tried before. They solved the persistent leakage issue I had at the "Y" piece junction and being a much tidier installation improved ground clearance eliminating a lot of the annoying (damaging) grounding on speed bumps.(but not by the particularly viscious one in Portsmouth Ferry terminal)
I used the all Stainless Steel version so I am hopeful that if I do need to dismantle the system I will not have to resort to a hacksaw.
Picture below

[elansprint71]

Susan Miller sells similar s/s items. Agree with your comments.

Pete.

[chrishewett]

Thanks to you both for this thread.
I shall be ordering some myself on monday.
Chris

[Jason1]

Hi

I bought mine from Ebay, they were the same make but a lot cheaper than the ones at Stoneleigh

See user plentyotooles it may be worth a look?

Jason

[NORTHWALES+2]

What size are the clamps and where can you purchase the Mikalor clamps from?

[rjaxe]

I obtained mine mail order from:
http://www.powerengineering.co.uk/mikalor/
The smaller clamps were 37-40mm and the larger one 43-47 mm.