ELAN WONT START
15 posts
• Page 1 of 1
HiGuys CANT FIGURE WHY THE ELAN WONT START ---ANY IDEAS >>???? ED
Last edited by twincamman on Sun Mar 09, 2008 2:45 pm, edited 1 time in total.
dont close your eyes --you will miss the crash
Editor: On June 12, 2020, Edward Law, AKA TwinCamMan, passed away; his obituary can be read at https://www.friscolanti.com/obituary/edward-law. He will be missed.
Editor: On June 12, 2020, Edward Law, AKA TwinCamMan, passed away; his obituary can be read at https://www.friscolanti.com/obituary/edward-law. He will be missed.
-
twincamman - Coveted Fifth Gear
- Posts: 3175
- Joined: 02 Oct 2003
twincamman wrote:---ANY IDEAS >>???? ED
Move
Mine started right up yesterday, 75 degrees and sunny
- mopho
- Third Gear
- Posts: 241
- Joined: 22 Oct 2003
Ed,
Your high tension cable is not fully seated in the coil.
Your high tension cable is not fully seated in the coil.
Frank Howard
'71 S4 SE
Minnesota
'71 S4 SE
Minnesota
- Frank Howard
- Coveted Fifth Gear
- Posts: 1182
- Joined: 30 Mar 2004
Hi guys,
I am surprised that you have all missed the fact that the belt has come off the oil poorie. It can be quite clearly seen in pic 1
Alex B
I am surprised that you have all missed the fact that the belt has come off the oil poorie. It can be quite clearly seen in pic 1
Alex B
Alex Black.
Now Sprintless!!
Now Sprintless!!
-
alexblack13 - Coveted Fifth Gear
- Posts: 2306
- Joined: 17 Oct 2007
you are so lucky ---I tried in the 70s and was refused ----pretty picky for a place founded by convicts - --ed
dont close your eyes --you will miss the crash
Editor: On June 12, 2020, Edward Law, AKA TwinCamMan, passed away; his obituary can be read at https://www.friscolanti.com/obituary/edward-law. He will be missed.
Editor: On June 12, 2020, Edward Law, AKA TwinCamMan, passed away; his obituary can be read at https://www.friscolanti.com/obituary/edward-law. He will be missed.
-
twincamman - Coveted Fifth Gear
- Posts: 3175
- Joined: 02 Oct 2003
wellll thats a matter between the Chief Magistrate and I --had to do with whip cream and shape craft industries -- Salvation Army girls in fishnet stockings - some drunken midgets that juggled --then the angry mimes and a group of touring Morris dancers got involved ----nasty business : ed
Last edited by twincamman on Thu Mar 13, 2008 5:06 pm, edited 1 time in total.
dont close your eyes --you will miss the crash
Editor: On June 12, 2020, Edward Law, AKA TwinCamMan, passed away; his obituary can be read at https://www.friscolanti.com/obituary/edward-law. He will be missed.
Editor: On June 12, 2020, Edward Law, AKA TwinCamMan, passed away; his obituary can be read at https://www.friscolanti.com/obituary/edward-law. He will be missed.
-
twincamman - Coveted Fifth Gear
- Posts: 3175
- Joined: 02 Oct 2003
My stepson and his wife and child lived in Sydney for a while. We took some fine vacations there in our winter - walking along the cliffs, lounging on Coogee Beach - planning future trips, even wondering if we might retire there... maybe pick up a nice Elan?
Then the so-and-so moved to Shanghai!
Then the so-and-so moved to Shanghai!
Andrew Bodge
'66 Elan S2 26/4869
I love the sound of a torque wrench in the morning. Sounds like... progress.
'66 Elan S2 26/4869
I love the sound of a torque wrench in the morning. Sounds like... progress.
-
RotoFlexible - Fourth Gear
- Posts: 679
- Joined: 01 Sep 2005
welll I found the door to the garage- so in a week or two I can get in the place and finish pulling the motor -- rebuilding the block and then get to sort the thing out---- [ after the initial run in period ]---ed
dont close your eyes --you will miss the crash
Editor: On June 12, 2020, Edward Law, AKA TwinCamMan, passed away; his obituary can be read at https://www.friscolanti.com/obituary/edward-law. He will be missed.
Editor: On June 12, 2020, Edward Law, AKA TwinCamMan, passed away; his obituary can be read at https://www.friscolanti.com/obituary/edward-law. He will be missed.
-
twincamman - Coveted Fifth Gear
- Posts: 3175
- Joined: 02 Oct 2003
15 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 18 guests