Lotus Elan

S1 Radiator from Coolex Heat Transfer in UK

PostPost by: Certified Lotus » Thu Dec 18, 2014 11:49 am

I'm looking at the Aluminum radiator that Coolex Heat Transfer builds for my S1. Has anyone bought one from them and have comments regarding build quality and price/value?
Glen
05 Elise - Back where I started
65 Elan S2 - 26/4055
72 Europa - 74/2358R
69 Elan S4 - 45/7941
64 Elan S1 - 26/0379
12 Colin 30 - Lotus Racing Kart
07 Exige S - Wicked Road/Track Car
07 Exige S - Fast Road/Track Car
06 Elise - Track pack
User avatar
Certified Lotus
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1240
Joined: 04 Aug 2014
Location: Princeton, NJ

PostPost by: Europatc » Thu Dec 18, 2014 5:53 pm

Hello CL
I have had two radiators off coolex. I would have no hesitation in recommending them, good service, good product, good price
thats just my opinion
all the best
Stuart
ImageImage
User avatar
Europatc
Third Gear
Third Gear
 
Posts: 391
Joined: 19 Aug 2010
Location: Hessle East Yorkshire

PostPost by: mark030358 » Thu Dec 18, 2014 7:08 pm

Me too.... Good quality good prompt service. Only complaint is the mounting holes are "off" and are a bit wide so need a bit of a feckle. But quality kit...
User avatar
mark030358
Fourth Gear
Fourth Gear
 
Posts: 856
Joined: 29 May 2004
Location: Willaston, Wirral

PostPost by: Certified Lotus » Thu Dec 18, 2014 10:20 pm

Thanks for letting me know. Will place an order with them tomorrow.
Glen
05 Elise - Back where I started
65 Elan S2 - 26/4055
72 Europa - 74/2358R
69 Elan S4 - 45/7941
64 Elan S1 - 26/0379
12 Colin 30 - Lotus Racing Kart
07 Exige S - Wicked Road/Track Car
07 Exige S - Fast Road/Track Car
06 Elise - Track pack
User avatar
Certified Lotus
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1240
Joined: 04 Aug 2014
Location: Princeton, NJ

PostPost by: coolexperts » Mon Jun 24, 2019 2:28 pm

Hello All

The hole drilling and fettling is down to the Lotus works. Our radiator are always built to the dimensions and hole centres but the cars could be slightly out on the fiberglass manufacture by a couple of mill. Most radiators drop on trouble free but occasionally to side columns need a file to fit the body or visa versa.

Regards

Steve (Mr Cool)

Coolex Heat transfer Ltd.
coolexperts
Second Gear
Second Gear
 
Posts: 78
Joined: 08 May 2012

PostPost by: coolexperts » Mon Jun 24, 2019 2:30 pm

Hello All

The hole drilling and fettling is down to the Lotus works. Our radiator are always built to the dimensions and hole centres but the cars could be slightly out on the fiberglass manufacture by a couple of mill. Most radiators drop on trouble free but occasionally to side columns need a file to fit the body or vice versa.

Regards

Steve (Mr Cool)

Coolex Heat transfer Ltd.
coolexperts
Second Gear
Second Gear
 
Posts: 78
Joined: 08 May 2012

Total Online:

Users browsing this forum: No registered users and 12 guests