Oil pump
Posted: Wed Jan 15, 2020 11:05 am
Just to let members know.
developed an oil leak on the pump end plate.
took it off and the o ring had gone hard and oval
it was replaced with a carb manifold o ring , was a little bit smaller but stretched to fit.
replaced plate and no more leaks!!!
10 min job
Stuart
developed an oil leak on the pump end plate.
took it off and the o ring had gone hard and oval
it was replaced with a carb manifold o ring , was a little bit smaller but stretched to fit.
replaced plate and no more leaks!!!
10 min job
Stuart