Lotus Elan

Restoring an '65 S2, ISO the following:

PostPost by: sonunet » Tue Nov 12, 2019 11:47 pm

Hi, I'm in the middle of a nut and bolt restoration. Almost there....... the following list will help me get to almost almost almost there:

- S2 window glass (with the two holes for the finger pull), it's my understanding 1 hole = S1, 2 holes = S2
- Window locks L.H. & R.H. + the plastic pull dowel
- Boot hardware for the boot floor (looks like a metal tear drop + catch which bolts onto the body)
- Engine breather tube, the one that goes down and bolts onto the gearbox

If you have these or any of these please ping me over PM. Thanks in advance.

Sonny
sonunet
Second Gear
Second Gear
 
Posts: 51
Joined: 30 Dec 2009
Location: Denver, Co

PostPost by: Certified Lotus » Wed Nov 13, 2019 1:40 am

I think the engine breather tube that bolts to the transmission was early Elan S1 only. My S1 had this but my S2 did not.
Glen
05 Elise - Back where I started
65 Elan S2 - 26/4055
72 Europa - 74/2358R
69 Elan S4 - 45/7941
64 Elan S1 - 26/0379
12 Colin 30 - Lotus Racing Kart
07 Exige S - Wicked Road/Track Car
07 Exige S - Fast Road/Track Car
06 Elise - Track pack
User avatar
Certified Lotus
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1240
Joined: 04 Aug 2014
Location: Princeton, NJ

Total Online:

Users browsing this forum: No registered users and 0 guests