Carburattor Connection To Throttle Cables?
Posted: Sun Mar 27, 2005 6:59 pm
Hello All,
I have recently finshed a head rebuild on a car that has been off the road for a year, Everything is back together carbs are overhauled and reattached, currently the throttle coupling between the carbs is rotating downwards. When I come to attach the throttle cable, There is a guide for the same on a bracket at the top of the air box (carb side) However if I use this as a stop location for the outer cable, the remaining inner cable is pulling upwards, in the opposite direction to the direction of rotation of the throttle coupling.
I have tried reversing the throttle coupling, to turn it upside down, in this format it catches the carb body and does not fully open.
The workshop manual is silent about this aspect, however all of the photos I have seen show the throttle cable attaching to the carbs from above.
Could someone explain the correct, position method of attachment or position of the throttle coupling between the carbs?
If someone could take aclose up of their own car and e mail it I would appreciate it the address is [email protected]
Thank you in anticipation !!!
Martin
I have recently finshed a head rebuild on a car that has been off the road for a year, Everything is back together carbs are overhauled and reattached, currently the throttle coupling between the carbs is rotating downwards. When I come to attach the throttle cable, There is a guide for the same on a bracket at the top of the air box (carb side) However if I use this as a stop location for the outer cable, the remaining inner cable is pulling upwards, in the opposite direction to the direction of rotation of the throttle coupling.
I have tried reversing the throttle coupling, to turn it upside down, in this format it catches the carb body and does not fully open.
The workshop manual is silent about this aspect, however all of the photos I have seen show the throttle cable attaching to the carbs from above.
Could someone explain the correct, position method of attachment or position of the throttle coupling between the carbs?
If someone could take aclose up of their own car and e mail it I would appreciate it the address is [email protected]
Thank you in anticipation !!!
Martin