Modified airbox
3 posts
• Page 1 of 1
I am modifying my airbox to make it deeper but unfortunately I do not have the engine in the car so cannot take any critical measurements.
Would someone be kind enough to measure for me the distance from the external face of the metal backplate on the carbs to the side of the pedal box (Plus 2S on Dellorto's)?
Many thanks in anaticipation.
Cheers
Jon
Would someone be kind enough to measure for me the distance from the external face of the metal backplate on the carbs to the side of the pedal box (Plus 2S on Dellorto's)?
Many thanks in anaticipation.
Cheers
Jon
- jono
- Coveted Fifth Gear
- Posts: 2035
- Joined: 17 May 2007
Jono,
On my 68 car it is 4 inches.
I'm not so sure if this will be the same on all cars as the later air boxes are larger than mine.
Cheers
John
On my 68 car it is 4 inches.
I'm not so sure if this will be the same on all cars as the later air boxes are larger than mine.
Cheers
John
- elanman999
- Third Gear
- Posts: 492
- Joined: 12 Nov 2005
3 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 9 guests