Weber jets

PostPost by: triumphelan » Mon Oct 17, 2005 12:09 pm

Main jet is marked 100 the hole size is 1.1m/m dia.is that the correct size for a main jet with that marking on .
Regards John 1969S4DHC
triumphelan
Third Gear
Third Gear
 
Posts: 291
Joined: 04 Jul 2005

PostPost by: type26owner » Mon Oct 17, 2005 1:41 pm

John,
100=1.00mm diameter. Someone has altered the jets by enlarging the bore by another 100 microns. Another 100 microns is a %20 difference in the area.
type26owner
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1704
Joined: 18 Sep 2003
Previous

Total Online:

Users browsing this forum: No registered users and 15 guests