Page 1 of 1

Back fire

PostPosted: Sun Dec 30, 2018 7:38 pm
by el torro
Happens at idle speed but not on acceleration/ return to idle , on Weber dcoe big valve twin cam,any hints welcome or recommended experts in Scotland

Re: Back fire

PostPosted: Tue Jan 01, 2019 5:32 am
by benymazz
Any advice I can offer is purely speculative and based on my very limited experience, but is it backfiring through the intake, or is it an "after-fire" (in the exhaust)?

Re: Back fire

PostPosted: Tue Jan 01, 2019 10:41 am
by Donels
My guess would be an air leak, probably from the rubber seals/misab plates between carbs and manifold.

Dave

Re: Back fire

PostPosted: Tue Jan 01, 2019 2:15 pm
by el torro
Thanks for reply yes I will tighten up carbs to inlet manifold I have fitted the Swedish plates so I think they should take more pressure