steering shaft installation
4 posts
• Page 1 of 1
I am now installing the steering column and shaft.
Where is the turn indicator canceling cam on the shaft located when wheels are straight and wheel centered? I beleive it is at the "9 o'clock" position pointing to the indicator switch.
Bob
Where is the turn indicator canceling cam on the shaft located when wheels are straight and wheel centered? I beleive it is at the "9 o'clock" position pointing to the indicator switch.
Bob
- rdssdi
- Coveted Fifth Gear
- Posts: 1426
- Joined: 30 Sep 2003
Bob,
It will fit at 3:00 or 9:00 but 9:00 is correct.
It will fit at 3:00 or 9:00 but 9:00 is correct.
Frank Howard
'71 S4 SE
Minnesota
'71 S4 SE
Minnesota
- Frank Howard
- Coveted Fifth Gear
- Posts: 1182
- Joined: 30 Mar 2004
The cancel bump points to the indicator switch. On my Just 2 this is 3:00 since the indicator is on the right hand side. On other cars the indicator may be on the left hand side in which case the bump will be at 9:00.
Rob
Rob
- Rob_LaMoreaux
- Fourth Gear
- Posts: 968
- Joined: 22 Sep 2003
Thanks.
My switch ius located on the left. I assume it is position counter to the side that the shifter is on or the same side as the driver. As my car is LHD the switch is on the left. I will set the cam on the left at 9:00 o'clock position.
My switch ius located on the left. I assume it is position counter to the side that the shifter is on or the same side as the driver. As my car is LHD the switch is on the left. I will set the cam on the left at 9:00 o'clock position.
- rdssdi
- Coveted Fifth Gear
- Posts: 1426
- Joined: 30 Sep 2003
4 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 18 guests