Lotus Elan

Clevis pin size for brake & clutch push rods

PostPost by: tjb0274 » Sun Oct 14, 2018 11:23 pm

Can anyone tell me the correct diameter(s) and lengths for the brake & clutch m/c clevis pins?
1969 S4
1969 Europa S2
1990/1970 Ricciardi/Alfa
tjb0274
First Gear
First Gear
 
Posts: 46
Joined: 09 May 2018
Location: Australia

PostPost by: oldelanman » Mon Oct 15, 2018 8:41 am

Clevis pin is 5/16" dia x 7/16" long (underside of head to edge of split pin hole) ...... or approx 8mm x 12mm

That's for the original pushrod with fixed clevis, if an adjustable clevis is fitted or the pedal has been drilled oversize to overcome wear then yours may be different.
Roger
S4 DHC
oldelanman
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1433
Joined: 02 Jan 2008
Location: Dorset UK

PostPost by: tjb0274 » Mon Oct 15, 2018 8:19 pm

oldelanman wrote:Clevis pin is 5/16" dia x 7/16" long (underside of head to edge of split pin hole) ...... or approx 8mm x 12mm

That's for the original pushrod with fixed clevis, if an adjustable clevis is fitted or the pedal has been drilled oversize to overcome wear then yours may be different.


Awesome - thanks @oldelanman :-)
1969 S4
1969 Europa S2
1990/1970 Ricciardi/Alfa
tjb0274
First Gear
First Gear
 
Posts: 46
Joined: 09 May 2018
Location: Australia

Total Online:

Users browsing this forum: No registered users and 10 guests