Clevis pin size for brake & clutch push rods
Posted:
Sun Oct 14, 2018 11:23 pmby tjb0274
Can anyone tell me the correct diameter(s) and lengths for the brake & clutch m/c clevis pins?
Re: Clevis pin size for brake & clutch push rods
Posted:
Mon Oct 15, 2018 8:41 amby oldelanman
Clevis pin is 5/16" dia x 7/16" long (underside of head to edge of split pin hole) ...... or approx 8mm x 12mm
That's for the original pushrod with fixed clevis, if an adjustable clevis is fitted or the pedal has been drilled oversize to overcome wear then yours may be different.
Re: Clevis pin size for brake & clutch push rods
Posted:
Mon Oct 15, 2018 8:19 pmby tjb0274
oldelanman wrote:Clevis pin is 5/16" dia x 7/16" long (underside of head to edge of split pin hole) ...... or approx 8mm x 12mm
That's for the original pushrod with fixed clevis, if an adjustable clevis is fitted or the pedal has been drilled oversize to overcome wear then yours may be different.
Awesome - thanks @oldelanman
